AMCR 2300 GEN 3
Power Conditioners
AMCR 2300 GEN 3
Power Conditioners
45 ~ 60 kVA
Capacity+/-2%
Voltage regulation10 Year Warranty
Manufactured in Mexico
Top tier precision & 100% reliability for critical loads
Designed to withstand complex electrical environments while providing optimal output.
- Overload Protection
- Spike Supressor
- Automatic Shut Off
- 99% Efficiency
- Remote Monitoring
- Maintenance Bypass
Guaranteed protection for your devices and electronic equipment
Overload Protection
Protects against stress, overheating & damage due to voltage overloads of up to 400%, such as in motors, compressors or pumps with inherent fluctuating energy demands.
Spike Supressor
Also known as a surge suppressor, protects against aggressive transient voltage spikes that can permanently damage electronic components, cause overheating and significantly reduce lifespan of equipment connected directly to the power line.
Automatic Shut Off
Performs automatic shut off for the input to protect the load against dangerous voltage variations. When the voltage level comes down to safe levels, the unit reestablishes connection and operates normally.
99% Efficiency
Highly efficient operation allows for low cost operation and supports product longevity.
Remote Monitoring
Convenient and timely information is consistently available. Ideal for off site locations
Maintenance Bypass
Bypass switch protects the load, allowing continuous power even in case of maintenance or repair.
Video
Applications
Audiovisual Systems
Automated Assembly Lines
CNC Machinery
Computer equipment
Control Equipment
Heavy Industry
Robotics
Telecommunication
Technical Specifications
Input
|
AMCR
|
2345
|
2360
|
||||
|---|---|---|---|---|---|---|
| Capacity (kVA / kW) | 45/45 | 60/60 | ||||
| Input Voltage (V) | 110/190, 115/200, 120/208, 127/220 or 254/440, 266/460, 277/480 | |||||
| Overload Protection | Thermo-magnetic switch on the output/ fuse (varies by model) | |||||
| Range (Accepted) | ± 15% | |||||
| Operational Frequency | 60 ± 10%, does not alter frequency* | |||||
| Harmonic Distortion | Less than 2 % THD | |||||
| Power Factor | Does NOT alter, adaptable to load requirement | |||||
* Tolerance available under evaluation of the Engineering department
Output
|
AMCR
|
2345
|
2360
|
|---|---|---|
| Output Voltage (V) | 110/190, 115/200, 120/208, 127/220 or 254/440, 266/460, 277/480 | |
| Voltage Regulation Range | ± 2% (typical) | |
| Power Supply Impedance | Less than 2% | |
| Sustained High/Low Voltage Protection | Contactor or relay on the output, automatic shut off (varies by model) | |
| Correction Time | Immediate, (8.3 milliseconds, 1/2 cycle) | |
| Reset | Automatic (programmed at factory) | |
| Reset Time | 3 second standard time ** | |
** Factory configurable on request
Physical & Mechanical
|
AMCR
|
2345
|
2360
|
|---|---|---|
| Recommended Use | Domestic, commercial and/or industrial, non vibratory, indoor use | |
| Transformers | Electrolytic copper magnetic wire and silicon steel sheet | |
| Cooling & Ventilation | Natural convection | |
| Cabinet | Galvanized steel sheet metal | |
| Paint Finish | Primer and electrostatic baked epoxy powder coating or air-dry (varies by model) | |
| Maximum Altitude Of Operation (mamsl) | 3,000 | |
| Operational Temperature (°C) | 0 ~ 40 | |
| Relative Humidity | 0 ~ 95% without condensation | |
| Dimensions, height x width x depth (mm) | 1490 x443 x 770 | |
| Weight (kg) | 315 | 332 |
Technology
|
AMCR
|
2345
|
2360
|
|---|---|---|
| High Frequency Noise Protection | PI Filter | |
| Control Technology | Microcontroller | |
| Monitoring (Operational Status) | Display with LEDs / Ethernet (optional) | |
| Measurement Parameters | Voltage, current, power, frequency, power factor | |
| Electronic Commutation | TRIACs TRIACs or SCRs (varies by model) | |
Electrical
|
AMCR
|
2345
|
2360
|
|---|---|---|
| Regulation | Line-Line & Line-Neutral | |
| Spike Suppressor | Varistors on the output | |
| Efficiency | 98% minimum | |
| Overload Capacity | Up to 400% in intermittent startups | |
Request quote
Power Calculator
Instantly calculate equipment capacity by filling in the missing information:
